" TL151P.TXT " 11/06/95 1. Copy TL15FIX.EXE to hard drive (ie. c:\temp ). 2. Run TL15FIX.EXE from hard drive, making five additional files: DISK.ID INSTALL.DAT INSTALL.EXE TL.LIF TL151P.TXT (These Instructions) 3. Copy the first four files to a high density 3.5" diskette, and run the TaskLink installation utility from the floppy diskette. 4. TaskLink 1.51P Addresses the following: BUGno05991 - Load Master From Socket One. TaskLink now has the capability of loading a single master device from the rail socket instead of the master socket, on a PSX500/1000 programmer. See the new Check Box in the General Parameters Screen with a PSX500/1000 programmer selected. BUGno07202 - Red Light/Green Light. TaskLink and the PSX series programmers should now have their status lights synchronized. This will only work with version 3.5 or later of the PSX500/1000 programmer firmware, or version 2.1 of the PSX400. TaskLink has a new flag in the Set Preferences dialog box. "Enable Red LED's for Empty Sockets". This feature works with the PSX series programmers. Make sure this feature is Enabled or Disabled on both the programmer and TaskLink.